STEP 1. Connecting your DSL Modem to the Phone Line

A. Plug the DSL Filter with Splitter into a phone jack on the DSL line near your computer. The purpose of the DSL Filter is to stop the DSL signal from interfering with your voice line. You only need to use the filter if you plan on plugging a phone or fax machine into this phone jack.

B. Using the phone cable provided, connect the DSL modem to the Filter. Be sure to plug the modem into the DSL/HPN jack on the filter.

STEP 2. Connecting the DSL Modem to your computer(s).

(ETHERNET Recommended)

Using the Ethernet Cable, connect your DSL modem from the Ethernet jack to your computer. (You can connect up to 4 computers via Ethernet. Additional ethernet cables must be purchased)

STEP 3. Connecting the DSL power supply.

Connect your DSL modem to the power, and switch the modem on.

Wait 15-30 sec for the startup sequence to complete, the LINK light on your DSL modem will change from blinking to solid.

Windows Support
Windows XP
Windows 2000
Windows 95/98/ME